180° Waterproof Square LED Panel Light Inside 48W IP50 100 Lumen / Watt CE Approval

180° Waterproof Square LED Panel Light Inside 48W IP50 100 Lumen / Watt CE Approval

.

Maintenance:

Pls don’t repair or maintain the product under condition user lack of professional person or

knowledge for circuit, especially in absence of necessary equipment, avoiding extending the

damage or breaking down the important components.

As there is high voltage circuit inside the product, during maintenance pls don’t dissemble orhand

touch the PCB under power - on condition. There is isolation protection layer on circuit board, pls

don’t touch acidic materials when you disassemble the circuit board, like sweat etc. Please use

plate washer water to clean the circuit board when there is stain or dust.

Producing steps and aging pictures

Application Notes

1.Please make sure the working voltage is correct. Incorrect voltage may lead to damage of the

panel light.

2. Do not use this panel light in the outdoor environment, emergency exit facilities, or emergency

lighting facilities.

3. To avoid electric shock, after fitting the panel light and switch on the power, please do not

touch the metal area of the screw base.

4. Before open the package, please check for any damage on the package caused during

transportation. Please inform the supplier for replacement if any damage on the package is

found.

5. For product safety, please follow the instruction manual.

6. Before installation, please make sure the installation area can endure 10 times of the panel

light weight. panel light should be installed in the flat surface, an environment without vibration,

swing, and threat from fire.

7. During the panel light operation, the case may reach 55°C. Panel light should keep away from

temperature sensitive equipment. After switch off the power, please wait for 30 minutes, before

uninstall the light bulb.

8. This is a semiconductor lighting fixture, and it is very sensitive to the ambient temperature. If th

e ambient temperature is above 55°C, the life span of the panel light will be shortened. Hence

please keep the panel light away from the heat source. To maximize the life span of the panel

light, please maintain the working temperature at between -20°C to 25°C, and make sure the

working environment has good ventilation.

9. Please do not switch the power on and off continuously within a short period. This will lead to the damage of the lamp.

10. Under emergency situation, please do the following:

(1) Please check the input voltage.

(2) Please check the switch is functioning normally

(3) If the lamp still cannot light up, please inform the professionals for further examination.